1. Fara na'urar damfara kamar yadda aka tsara kuma jira shi ya yi aiki akai-akai (matsin samar da iska mai karfin iska mafi girma ko daidai da 0.9Mpa), buɗe bawul ɗin samar da tankin iska kuma tabbatar da cewa karfin iska na kayan aiki na iskar iskar shine 0.8-0.9Mpa; na'urar damfara na iska an fara aiki ne a ƙarƙashin yanayin rashin kaya, kuma bayan aiki na yau da kullun, zubar da mai da ruwa a cikin tankin iska.
2. Kunna na'urar bushewa, precool na mintuna 5-10, buɗe bawul ɗin tacewa a cikin lokaci, kuma zubar da sauran ruwan.
3. Jirgin da aka matsa yana shiga cikin tanki mai ɗaukar iska ta hanyar tace carbon da aka kunna. Lokacin da matsa lamba tanki ya tashi zuwa Mafi Girma ko daidai da 0.8Mpa, buɗe bawul ɗin ɗaukar iska na hasumiya kuma kula da duba ko kowane tsarin aiki na al'ada ne;
4. Kunna babban wutar lantarki na nitrogen, kunna wutar PLC a cikin akwatin sarrafa wutar lantarki, kunna maɓallin farawa na nitrogen a kan akwatin sarrafa wutar lantarki ko kunna maɓallin farawa akan ƙirar mutum{1}. Tsarin sarrafawa yana shiga yanayin aiki ta atomatik, duba ko kowane haske mai nuna alama al'ada ne, kuma lura ko kowane solenoid bawul da bawul na pneumatic suna canzawa akai-akai (an ƙaddara bisa ga canje-canjen da aka nuna ta ma'aunin matsa lamba).
5. Bayan tsarin ya shiga cikin yanayin aiki, kunna wutar lantarki mai sarrafa nitrogen analyzer.
6. Daidaita girman bawul ɗin shigarwa, sannu a hankali buɗe tsarin bawul ɗin fitarwa don gudana, kuma daidaita matsa lamba na matsa lamba mai rage bawul ɗin da ke sarrafa bawul ɗin pneumatic zuwa kusan 0.5Mpa (yawanci an daidaita shi a masana'anta).
7. Lokacin da kayan aiki ya shiga cikin gwajin gwajin, daidaita tsarin gwajin gwaji don shigar da gwajin (daidaita ma'aunin samfurin rage yawan bawul don daidaita matsa lamba zuwa 0.05-0.1Mpa, daidaita ma'aunin samfurin samfurin, kuma jin cewa akwai iskar gas da ke fitowa a mashigar binciken). Bayan kayan aikin yana aiki akai-akai, daidaita tsaftar ƙararrawar mai nazarin nitrogen, sannan duba ko ƙararrawa mai tsafta da sautin ƙararrawa da haske na al'ada ne.
8. Buɗe bawul ɗin iskar gas ɗin da bai cancanta ba, gabaɗaya rufe bawul ɗin tsayawa a gaban ma'aunin ma'aunin nitrogen, daidaita magudanar ruwa zuwa rabin abin da aka ƙididdigewa, da yin nitrogen a cikin ƙaramin adadin. Bayan iskar gas ɗin ya cika ma'auni, sannu a hankali buɗe bawul ɗin tsayawa mai tsaftar iskar gas, daidaita magudanar ruwa zuwa madaidaicin magudanar ruwa, rufe bawul ɗin tasha, kuma ana iya amfani da kayan aiki lokacin da yake aiki akai-akai.