1. Yanke tushen iskar gas na janareta na nitrogen kuma cire matsa lamba na ciki na kwandon carbon da aka kunna);
2. Sauke slipknot (ko flange) akan gwangwanin carbon da aka kunna;
3. Juyawa counterclockwise don cire ƙusoshin gyaran gyare-gyaren tsakanin murfin babba da kwandon carbon (ƙaramin membran nitrogen generator);
4. Fitar da ball na maganadisu, farantin sieve, da zanen tacewa cikin tsari;
5. Zuba ɓangarorin carbon da aka kunna na asali kuma tsaftace kwandon carbon;
6. Cika sabbin ƙwayoyin carbon da aka kunna cikakke;
7. Shigar da kayan haɗi na janareta na nitrogen a cikin tsari kuma ƙara ƙarar murfin saman;
8. Kula da ko zoben rufewa na flange ba shi da kyau. Idan ya lalace, yana buƙatar canza shi.
9. Bayan shigar da gwangwanin carbon, kula da kada ku haɗa slipknot (ko flange) a wurin da farko, yi amfani da farin tawul ko farar zane don toshe hanyar fita, fara injin janareta na nitrogen da injin damfara da na'urar bushewa na tsawon mintuna 30, sannan a duba ko akwai wani foda na carbon ko tabo baƙar fata akan farin tawul ko farin zane; idan haka ne, share don ƙarin minti 10. Bayan tabbatar da cewa yana da tsabta, ƙara maƙalar slipknot kuma bincika yatsan yatsa.
10. Gargaɗi: Bayan maye gurbin carbon da aka kunna a cikin janareta na nitrogen, tabbatar da tsaftace tankin carbon da aka kunna na dogon lokaci. Lura cewa ya kamata a cire kwararar iska daga tashar carbon da aka kunna, kuma kada a taba samar da iska kai tsaye zuwa janareta na nitrogen.